Print Page Wiring in Electric fuel pump on a ’60 — Volkswagen Campmobile

18 Мар 2015 | Author: | Комментарии к записи Print Page Wiring in Electric fuel pump on a ’60 — Volkswagen Campmobile отключены
Volkswagen Campmobile

Modified Cadillac

Home = = Topic started by: Fatz n on March 02, 2011, 02:57:54 PM

Wiring in Electric fuel on a ’60

Post by: Fatz n on March 02, 2011, 02:57:54 PM

Hi

Electrical Systems not my strong got the pump installed and grounded the other wire goes I to the live side of the ignition but which wire do I go on to it looks spaghetti up there, help !

Re: Wiring in Electric fuel on a ’60

Post by: pat65429 on March 03, 05:40:42 AM

I am not sure of the colors, but if I was it I would place a relay so the key switch would not have to all the load of the pump. I also that when making and fuel injection harnesses in rods it is important to hook the pump and relay up to a source is hot in both the cranking and the run positions of the

Title: Re: Wiring in Electric pump on a ’60

Post by: on March 03, 2011, 10:06:37 AM

are the specs on your pump as far as or watts?

Even for a temporary setup you want to be careful where you adding a 3 or 4 amp load original could be bad news from a reliability and safety standpoint.

other have said you want to overload the whole switch or at the very least pop a that shares with other circuit you need to the car running.

I / we are not saying it cant be the way you want but I dont have a or experience with a 60.

The relay would be easy even as a setup and also then you the parts to do it #039;right#039; later.


The temporary relay setup be power from a fused like the battery to one side of the terminal 30 on a typical 80#039;s and up relay. The other side of the to the fuel pump, terminal 87. 85 is ground. Terminal 86 can go to the + of the ignition + of the ignition coil will be on cranking and running. The relay hold fine even if its a points system with a resistor.

Title: Re: Wiring in Electric pump on a ’60

Post by: on March 03, 2011, 12:01:47 PM

I the standard part # is RY30 for the

Title: Re: Wiring in Electric pump on a ’60

Volkswagen Campmobile

Post by: on March 04, 2011, 01:38:40 AM

RY30 crosses to a Napa part ECH AR201, its about Also Napa value MPE AR201SB, about $9. I would use the one myself.

You should be able to either of those number to ever brand your carries.

Its the one I was thinking of and is used on of factory applications and even DIY so should be in stock everywhere.

You should be able to get a pre wired socket if you want to or you can just use the on wire ends.

There is a variant that has an ear for mounting.

Title: Re: Wiring in Electric pump on a ’60

Post by: n Finz on March 04, 2011, AM

Thanks Guys,

Thank you all for time Effort in this Stampie, pal65429 73eldo.

Volkswagen Campmobile
Volkswagen Campmobile
Volkswagen Campmobile
Volkswagen Campmobile
Volkswagen Campmobile

Interesting Articles

Other articles of the category "Campmobile":

Twitter-news
Our partners
Follow us
Contact us
Our contacts

dima911@gmail.com

Born in the USSR

About this site

For all questions about advertising, please contact listed on the site.


Volkswagen all cars catalog with specifications, pictures, ratings, reviews and discusssions about cars Volkswagen.